Descenders and Belay Devices

Kong Back-UP Magnet

Device that allows the Back-Up to work in optimal position while maintaining the factor of a possible fall always lower than "1"

CMI 11" Sport Rack-Standard Eye

Introducing the new gold standard in rappel racks. At just 11" long, this shorter rack is poised to give its larger brothers a run for their money. Uniquely designed , CNC machined bars give an increased rope offset between bars, resulting in an 18%...

SMC Radius Ring

Designed to meet the demanding requirements of arborists and professional riggers, these rings feature an ultra-smooth interior radius for smooth, predictable movement on a harness bridge or as part of a friction saver. The best-in-class strength ratings...

SMC Descending Ring

The original rappel rings. SMC Descending Rings are light-weight, one-piece aluminum rings which are used as part of a non-permanent rappel anchor. They are intended to protect webbing or cordage anchors from wear caused by pulling your rope. The low...

SMC Brake Bars

Aluminum or Stainless Steel? Rappel Bars from SMC come in two material options, Aluminum or Stainless Steel. There are several technical reasons for selecting the right material for your application. Aluminum Bars have many advantages. It’s lighter...

SMC Descent Control 8

Exceptional control when starting acceleration, rappelling speed, and deceleration for stopping are the most notable characteristics of the Descent Control 8 Descender. Light weight, tough, and stainless steel wear-resistant surfaces are other important...

Black Diamond ATC Pilot Belay Device

The lightweight Black Diamond ATC Pilot represents an advance in technology for the world of assisted braking devices. Providing an added level of security to your belay, the ATC Pilot threads similarly to other tubular belay devices and accommodates...

Petzl PAW S Rigging Plate

For organizing the belay and creating a system with multiple anchors. Useful in aid climbing and for setting up Tyrolean traverses. Three anchor point holes Helps to equalize loads Lightweight and durable: made of aluminum Weight:  60...

Edelrid HANNIBAL

The special geometry of the HANNIBAL enables various braking levels, making it possible to precisely adjust the abseiling speed. Features: Suitable for single ropes from 8.5–12.0 mm With internal rubber ring to hold the carabiner in...

Petzl Auxiliary Open Brake for I'D

The auxiliary open brake is designed for I'D self-braking descenders. It may be used to increase the friction in accordance with the weight of the load and the diameter of the rope, or to release the rope at any time. Designed for I’D S,...

Petzl SIMPLE Descender

SIMPLE, as its name implies, is an easy-to-use caving descender. It can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes. Reduced bulk and low weight simplify progression in narrow passages. The pulleys can be rotated or replaced to...

Petzl STOP Descender

Descend with assisted braking for your cave explorations! STOP is a caving descender with assisted braking that can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes It provides better control over the descent and makes maneuvers on the...