Figure '8'

FOR BIG DIAMETER ROPES WITH WINGS HOT FORGED Figure '8' descender with wings for create a locking knot. Perfect for belaying the first climber with double ropes.The large central opening allows you to overcome any knots on the ropes.It works on...

This is the Frame for the CMI Sport Rack with the standard degree eye. Picture shown includes bars which are not included. CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose...

This is the Frame for the CMI Sport Rack with the 90 degree eye. Picture shown is for a standard sport rack with bars. CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless...

Big enough to handle the largest ropes--two of them. Extended horns on the upper ring make tying off a snap by preventing the rope from sliding up and locking off. Dual holes on the tie-in end allow the 8-Ring to remain attached to the harness while...

Big enough to handle the largest ropes--two of them. Extended horns on the upper ring make tying off a snap by preventing the rope from sliding up and locking off. Dual holes on the tie-in end allow the 8-Ring to remain attached to the harness while...

Our original design from 1974, every bit as popular today. Crafted of 6061-T6 aluminum alloy to maximize the strength-to-weight ratio, hardcoated to extend it's working life. Versatile and easy to use, excellent for the casual climber or rappeller...

The Totem was designed to be the most versatile rigging and rappelling tool available.  It can function as a rigging plate, an easy-to-lock-off figure 8, sticht plate, auto-blocking plaquette device, plus some other options that are unique to the...

The Rescue-Eight is a traditional style figure eight with side ears to add friction. Features: Made of T6 aluminum and machined from a solid block Milled edges and machined surfaces on both the top and bottom to ensure flat and uniform...

The SMC Large Figure 8 (with ears) is another of our descenders which is very popular with sport and professionals alike. This is the largest of our Figure 8 with ears and it is intended for use with a single or a double wrap of rope up to 5/8'' in...

The Russ Anderson/SMC figure 8 with ears is one of the most popular full-sized descenders used by professionals throughout the rescue, fire service and police/tactical markets. Machined from 1/2" (12.5mm) thick, solid aluminum heat treated bar and then...

The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point as is typical with most rescue harnesses. All the welding on this rack...

The classic descender for ropework, the figure 8 is perhaps the most widely recognized component of all vertical gear. This XL steel version from PMI® is designed for maximum wear and versatility. You can expect it to provide hundreds of hours of...